Amp Teardown

I finally got my amp and cabinet to the SPaRC (Student Projects and Research Committee) Lab in Broun Hall. I first had to take off the back of the amp head, which was just a few screws and it popped right off. I then took out four screws on the top of the head and then pushed the screwdrivers through each of those holes to push the actual amp up. Then the amp slid very easily out of the housing. I forgot to bring the output transformer, but that will be installed soon.

Transformers.

Robots in disguise. 

Out of the casing!

The main board. 

Speaker outputs.

Power switch.

These four screws are the ones to remove.